For a smooth top
Turn on Ironing and select Topmost surface. Use Monotonic line for the top surface pattern. For the smoothest face, print the visible side face-down on a clean smooth PEI plate.
3D PRINT TOOL
Country
Marker Maker
Type a country. Get a clean, proportional silhouette ready for your clock.
Uniform scaling is always on. Your country will never be stretched.
PREVIEW
Your country
— × — × — mm
Type a country aboveWe’ll preserve its real proportions.
Building detailed coastline…
Ready
Select your real nozzle size. The app will remove coastline detail too small for that nozzle.
BAMBU STUDIO STARTING PROFILES
Nozzle & finish guide
Use the same nozzle size here and in Bambu Studio. These settings are tuned as dependable starting points for the 10 mm-thick clock markers made by this app.
| Nozzle | Layer height | First layer | Wall generator | Wall loops | Top / bottom layers | Infill | Ironing |
|---|---|---|---|---|---|---|---|
| 0.2 mm | 0.10 mm | 0.15 mm | Arachne | 4 | 8 / 6 | 15% Gyroid | Topmost surface |
| 0.4 mm RECOMMENDED | 0.20 mm | 0.20 mm | Arachne | 3 | 5 / 4 | 12% Gyroid | Topmost surface |
| 0.6 mm | 0.28 mm | 0.28 mm | Arachne | 3 | 4 / 4 | 10% Gyroid | Topmost surface |
| 0.8 mm | 0.36 mm | 0.36 mm | Arachne | 3 | 3 / 3 | 10% Gyroid | Topmost surface |
Useful extras
Supports off. Wall order Inner/Outer. Seam Back or Nearest. Elephant-foot compensation 0.15 mm. Use a 3-5 mm brim only if narrow tips lift.
If detail disappears
Make the marker larger or change to a smaller nozzle. Keep the scale padlock closed so resizing never stretches the country.